Hunter Geniune Replacement Handheld Ceiling Fan Remote Control Transmitter 99123

Description

Genuine Original Hunter Replacement Remote Control #99123
For Hunter Ceiling Fans
This is a direct replacement for remote #s:  99122 or 99123
Wall bracket not included
Wireless receiver not included
Requires 3V
CR2032 Battery (included)
Part #K0474-02
FCC ID:  IN2TX41
FREQ:  434 MHz
Part #
K0474
must match for compatibility.  Please inquire if you're not sure.
Pairing Instructions:
Note: The remote must be paired before the fan will operate.
Turn off the breaker that powers the fan.  Leave power off for 1 minute and then turn back on.
Within 3 minutes of restoring power to the fan, press both the Fan Off button and the High button for at least 4 seconds. Your fan will turn on low to indicate successful syncing. If it does not, turn off power to your fan, wait 1 minute then try again. If using the transmitter with multiple fans, repeat this process for each fan.
If fan is a pull-chain model, please make sure that pull-chain control is set to High speed for remote to work correctly.